ITWissen.info - Tech know how online

multi-protocol label switching (MPLS)

Multi-Protocol Label Switching (MPLS) is a technology whose concept is based on the transmission of IP data via ATM. MPLS can be used to bypass complex meshed virtual circuits (VC) for individual virtual private networks (VPN) and to build thousands of VPNs on existing technology.

MPLS technology is used to increase the performance of wide-area networks and is expected to help handle rapidly growing IP traffic, provide quality of service in IP networks, and facilitate the transport of real-time data over packet-based networks.

MPLS switching is standardized by the Internet Engineering Task Force (IETF) and provides simplified management and improved organization of traffic in Internetworking systems and VPNs, as well as support for scalable and manageable QoS applications. With MPLS, a differentiated quality of service can be assigned to each application.

Label switching

The technical basis of MPLS switching is a label-based forwarding mechanism. According to the procedure, the IP packets are provided with labels according to their priority and are transmitted via a label switched path (LSP). For example, MPLS assigns connections with the required bandwidth to the data packets and gives them priority over less important data.

Label Information in MPLS In

Label Information in MPLS In

MPLS switching, the assignment of a data packet to a stream is performed only when it enters the network. When a data packet is sent to the next node, the label is sent along. This eliminates the need to analyze layer 3 information at the next nodes. The label is used as a table index in which the next node and a new label are defined. The old label is replaced and the data packet is sent to the next node. At the end of the network, the incoming labels are selected from the data packets and processed.

The components of the MPLS network

Structure of an MPLS network

Structure of an MPLS network

The central components of an MPLS network are the Label Switch Routers (LSR). They divide the IP datagrams to be transported into Forwarding EquivalenceClasses (FEC) based on the Layer 3 destination addresses and other characteristics (labels). Based on the labels, the downstream routers forward the incoming data packets. This process is called label switching.

The first LSR router in an MPLS network is the ingress label switch router, and the last is the egress label switch router. The entire path between the ingress label switch router and the egress label switch router is called the label switched path (LSP).

MPLS Protocols and Headers

MPLS Data Frame

MPLS Data Frame

The IETF has provided two signaling protocols for label assignment: the Label Distribution Protocol (LDP) with Constraint Routing LDP (CR-LDP) developed for MPLS, and the Resource Reservation Protocol (RSVP-TE) augmented with Traffic Engineering (TE).

The MPLS header consists of the 20-bit Label Value data field, which forms the basis for forwarding data packets through the MPLS network. This value serves as the index in the forwarding table. This data field is followed by the 3-bit Exp data field, which stands for Experimental Bits, and which normally supports DiffServ. The following 1-bit S data field (stack bit) indicates that the bottom of the stack has been reached. And the 8-bit Time-to-Live field protects the MPLS network against looping. It is decremented on every hop.

The complete MPLS architecture is described in RFCs 3031 and 3032.

Informationen zum Artikel
Englisch: multi-protocol label switching - MPLS
Updated at: 14.10.2014
#Words: 970
Links: